Table of Contents
• Greetings from Revival Audio
• Safety
• Unpack and Setup
• Positioning
• Connections
• Use and Maintenance
• Contact / Support
Greetings From Revival Audio
Welcome! Thank you for choosing Revival Audio products.
At Revival Audio, we always strive for great technologies and products to meet
our credo -
Listen to the Next Level.
That is our belief, promise and motivation.
Through our state-of-the-art products, you are one step closer to the perfection
of enduring listening experiences.
We design all vital components from scratch in Alsace, France,
to meet our picky
quality standard and bring you the next-level sound. All Revival Audio products
are designed and tuned by Daniel Emonts, our Chief Technology Officer and some
most talented engineers from their decades of expertise in the Hi-End speaker
field.
As the owner of a Revival Audio product, you have committed to greater listening
experiences for many years to come. Before you sit back and relax with your
favourite music flowing from your new speakers,
please take some time to read
this manual carefully
to get the best and most enduring enjoyment.
This manual provides information on
how to set up, use and maintain your
speakers,
to ensure that you get the best performance possible from your system.
Should you still be left with questions there are extensive support and FAQ
resources available on the Revival Audio website.
Still too complicated? Simply contact us and we will be happy to help.
We are passionate to share our story with you and more importantly,
to shape your story with Revival Audio products.
Bonne Ecoute! Enjoy Listening!
Safety
For safety reasons, and to ensure you achieve the best performance possible,
please carefully read this safety instruction before setting up the loudspeakers.
Unpacking, Installing and Placing the Loudspeakers
• When unpacking the loudspeakers, do not use any protective bag to lift or
move them to prevent injury or damage in case it tears. Recommend to keep
the original packaging for future use.
• Some Revival Audio speakers and stands are equipped with spikes. The spikes
can be very sharp - take care to avoid personal injury or damage to sensitive
surfaces.
• Only use stands recommended by Revival Audio. Loudspeakers mounted on
floor stands should always be restrained on the stand top-plate by screws,
rubber pads or similar adhesive materials.
• When using a trolley or cart, pay particular attention while moving the
equipment to prevent any risk of damage or injury.
• Keep the loudspeakers away from sources of heat, such as radiators, stoves,
heat registers or any other devices which give off heat (including amplifiers).
• Do not use the loudspeakers around water or outside.
• The device must not be mounted to a wall or ceiling.
Using, Maintaining and Repairing the Loudspeakers
• The loudspeakers must always be connected to a suitable amplifier and never
to a mains supply. Make sure the amplifier is switched off before making any
connection to avoid any risk of damage.
• Do not use accessories not recommended by Revival Audio to avoid risks of
damage or injury.
• Never insert an object into the ports of the loudspeakers, which may come into
contact with high-voltage components or cause a short circuit which may lead
to fire or electric shock. The only item to be used in the ports is the provided
foam plugs to tune the bass response.
• Never get liquid on the loudspeakers.
• Only clean the loudspeakers with a dry cloth.
• Avoid excessively warm, cold, or humid locations; direct sunlight or excessive
artificial light can affect the colour of the natural wood veneers used on
speaker cabinets.
• Avoid listening to speakers at high volumes for long periods.
Exposure to excessive volumes (over 85dB) for more than one
hour can cause irreparable damage to your hearing.
(IEC 60417-6044)
• Never try to open and repair the loudspeakers yourself without proper
instructions from Revival Audio. When it’s necessary to repair, make sure to
contact Revival Audio first; you will be provided with sufficient information and
guided through the process.
Unpack and Setup
Carefully open the packaging box and take out the speakers while leaving them in
the protective felt cover. Put the speaker on a flat, stable surface and remove the
cover. Place the speakers to their intended position, and optionally attach the
included cloth frame to protect the drivers.
Please avoid wearing watches, rings etc. which could possibly scratch the
speakers and the finishes when unpacking; Keep the speakers from any metal
parts on the clothes, such as zips, buttons, belt clasps, etc.
Compact Speakers
For optimum performance, compact speakers should be placed on a dedicated
stand. If using an optional dedicated Revival Audio stand, the speakers should be
securely mounted to the stand using the included fasteners. Please visit our
website for more information on which stand will fit your speakers.
Illustration: Mounting speaker to the top of the stand
The speakers can also be placed on a shelf or a cabinet, in which case we
recommend that you attach the included rubber pads to protect both the
shelf/cabinet and the speaker itself from scratches.
Illustration: Attaching rubber pads to the bottom of the speaker
Floor-Standing Speakers
Depending on the type of floor, the speakers can be placed with or without using
the included spikes (if applicable). Use spikes for carpeted concrete floors only.
For wooden floors please either use the included rubber pads or place the spikes
onto the included protective spike pads (if applicable). Take care not to damage
the floor when mounting a speaker with spikes onto the spike pads.
Positioning
Correct positioning will ensure that you get the best performance out of the
speakers. In this section, we provide some general positioning suggestions,
however, please note that there is no specific rule. Trust your ears and
experiment with what is the best for the sound image, which should be stable in
the middle, with depth.
Before going into detail, please always remember that your head is the focal point
of your speakers but not your seat. Secondly, remember that speakers sound
best when they are at your ears level.
General Placement of Stereo Systems
In major scenarios, the distance apart from the stereo speakers is recommended
between 2.5 m and 3 m (8 ft and 10 ft). When the speakers are too close, the
image will lack scale; on the contrary, the image might lose central focus.
The distance between the two speakers should be similar to or slightly less than
the distance from the speakers to the listening area.
Illustration of basic speaker positioning
Placement of Stereo Systems with Offset Drivers Layout
For certain Revival Audio products, the layout of drivers is offset (not centered).
Following our recommended distance above, we suggest placing the two
speakers with their drivers at the offset position, to maximize the distance for a
wider image.
In some scenarios, the speakers will be placed apart more than 3 metres; in such
cases, we recommend an inverted positioning.
Illustration of offset-drivers speaker positioning
Placement of Stereo Systems with Inward Angle
Depending on the acoustic setup of your listening area, it might improve the
sound image central focus when the speakers are inward angled. However, again
there is no rule on how many degrees should be angled. Try and get the best
stereo image which should be stable in the middle, with depth.
Placement of Stereo Systems using Port Plugs
Every listening environment is different, but there is one thing in general, you
should be aware of when you place the speakers – position them as far as
possible from any solid boundaries. We would suggest a minimum distance of
50 cm (18 in) between each speaker and any wall.
Illustration: Distance from the solid boundaries
In some cases, the speakers have to be placed close to the boundaries, then the
port plugs can help reduce the bass emphasis. Simply insert the port plug so
that the port is blocked.
Illustration: Applying the port plug
Connections
To prevent damage, please always switch off the amplifier when connecting or
disconnecting the speakers.
First, connect a two-pole speaker cable to the speakers. The posts on the
speakers will accommodate either spade connectors, 4mm banana plugs, or bare
wire. Make sure that none of the individual leads is touching each other,
especially when using bare wire.
Next, connect the speaker cable to the amplifier, while taking care that the red
marking on the speaker is connected to the same wire as the red marking on the
amplifier, and the white/black marking on the speaker is similarly connected to
the same wire as the white/black marking on the amplifier.
Illustration: Connecting speaker cable to the speaker.
Note: All Revival Audio speakers use single-wire terminals, as this provides the
simplest and highest performance connection. While some speakers use bi-wire,
this will only introduce potential for errors while not providing any actual
performance benefit.
Use and Maintenance
Breaking in
Please note that in a new pair of speakers the suspension takes a little time to
“settle”. The speakers will need several weeks of playback before reaching their
optimum potential and can sound a little harsh at first. While the sound may
soften up over time, this does not actually require any special handling – feel free
to start enjoying music from the get-go!
Power handling
Please note that the power handling of any loudspeaker, including those from
Revival Audio, provides a guideline and not a guarantee that the speaker will not
be damaged by a given amplifier.
While Revival Audio speakers have been designed with high power handling in
mind, any speaker can be damaged if improperly used: If you notice the sound
becoming distorted, you are exceeding the limits of either your amplifier or your
speakers, and you should turn the volume down until there is no audible
distortion.
Maintenance Overview
Generally, Revival Audio speakers do not need any special maintenance to
provide you with musical enjoyment for many years. That being said, there are a
few things you can do to keep the cosmetics up to their original condition.
Mainly, avoiding direct sunlight or cigarette smoke will protect the veneer and the
drivers from fading visually over time. Other than this, we have a few tips:
Maintaining tweeter/midrange domes
All Revival Audio speakers use coated soft-dome tweeters, and some models
include a coated soft-dome midrange as well. Please note that these domes are
maintenance-free, and should not be touched. Brushing or dusting off the domes
may cause damage to the coating, which will decrease performance. Any dust
that may settle on the domes will not affect acoustic performance.
If the dust is too visible and you want to reduce it, use a slightly humid microfibre
cloth and wipe away the dust with extreme care, do not push in the domes.
Maintaining woofers
The Basalt woofer cones may be brushed with a dry cloth, to remove dust.
Please take care not to push too hard on the dust cap in the middle of the cone,
as this may be damaged by improper handling.
Maintaining cabinets
Revival Audio speakers come in a variety of finishes. For most finishes, we
recommend simply dusting off the cabinet with a dry cloth. For any sticky stains,
you may want to use a damp cloth and gently polish away the stain, before drying
off with a separate, dry cloth. Please visit our website for more information on
the maintenance of your specific finish model.
Contact/Support
At Revival Audio, our goal is to live alongside our listeners. We highly value your
feedback, we care about your experiences, and we answer your questions.
Please visit our website revivalaudio.fr for further information. You can also find
our latest support information on our Support page.
Too complicated? Then write to us at [email protected], we will get back to
you at the earliest possible time.
We also invite you to follow us on our social media platforms.
Time to Enjoy
Enough reading – it’s time to start listening!
All of us at Revival Audio wish you many years of great next-level listening
experiences!
Other Information
Please visit revivalaudio.fr for additional language support on the user manual.
Veuillez visiter revivalaudio.fr pour obtenir le mode d'emploi en d'autres langues.
Weitere Sprachfassungen der Bedienungsanleitung finden Sie unter revivalaudio.fr
请访问
revivalaudio.fr
以获取其他语言版本的用户手册。
中国
RoHS
声明表
12
REVIVAL AUDIO OWNER’S MANUAL
