HOW TO SET UP YOUR REVIBER
HOW TO SET UP YOUR REVIBER
Maximum weight allowed is 150kgs (23st 9lbs)
1. Place the Reviber on a flat surface. On hard surfaces this is important as
the motion of the machine will make a noise on an uneven surface.
2. Should your floor be uneven, then you can unscrew/screw the feet of
the product as necessary to level the machine.
3. Attach the two resistance bands to the two silver coloured hoop fixing
positions on the underside of the machine.
BLUETOOTH SPEAKER SETUP
BLUETOOTH SPEAKER SETUP
Open the Bluetooth setting on your device and select Reviber
The readings scroll through Time, Speed and Distance. These show the time remaining
of the programme you are on, the speed increment at which the machine is running,
(between 0 and 99), and the equivalent distance you have walked/jogged/run.
1. ON/OFF
3. SPEED
6. TIME -
9. PAUSE
2. START
5. TIME +
7. PROGRAMME MODE
4. SPEED -
10. WALK-RUN-SPRINT
8. MANUAL QUICK MODE
MINS
MODE / SPEED
POWER
KM/H
KM
TIME
SPEED
DISTANCE
P1
P2
P3
P4
P5
