17
4.6 Settings
4.6.1 System
Main Menu-> Settings-> System
In this menu, you can set all the settings here by pressing the
W
/
X
key.
Press
OK
enter the setting menu, in this menu, you can set OSD Transparency /signal Audio tone / TV Screen Format/ volume/
language adjust display currently. Factory Reset
˖
Erase all channels and restore the factory default settings.
1. Menu Language:
Set the menu language.
2. Audio1:
Set the preferred audio language.
3. Audio2:
Set the sub-prime audio language.
4. Power Out 12V
:If you set it on ,it will support 12V voltage.
5. DVBT Power
:If you set it on ,it will provide voltage for T Tuner.
6. Fan Control
:If you set it on ,it will open the fan.
7. Signal Audio :
If you set “ON”, in the TP Search interface when you highlight a transponder with signal, it will sound
automatically. If you set “OFF”, in the TP Search interface when you highlight a transponder
with signal, it will not sound.
4.6.2 OSD Setup
Menu->Settings>OSD Setup
1
. Display Mode:
Set the HD format between 1080p, 1080i, 720p, 480i, 480p.
2
. TV Type:
Set the TV Type on PAL/NTSC/Auto state.
