It is recommended to clean the device periodically:
- Fan casing and blades clean form the dirt.
- If the device is not used for a longer time disconnect the voltage supply.
- The device is transported with the closed air stators. It is essential to open them
in 30 % before first start. Not keeping to the following recommendation may
cause the damages of the fan.
Opening the air stators must be made by two hands in parallel. Not keeping to
the following recommendation may cause the damages of the air stators.
6. CONTROLS
To make easier the usage of the Reventon Group devices we also offer
the additional controls:
Fan speed controller -
designed to change the single-phase fan's speed voltage
controlled in industrial supply and heating systems
8. TERMS OF WARRANTY
I. Reventon Group Sp. z o.o. [Ltd. ] 3B Montazowa Street , 43-300 Bielsko-Biała,
Poland, is the producer of the Reventon Group brand. The warranty concerns the
following devices and it is valid for 2 years:
- destratification fan HC 5100 m3/h
II. Warranty is valid in the European Union.
III. The terms of warranty are valid from purchasing the device (the date issuing a
document confirming the purchase of the device) but not further than 30 months
from leaving the producer’s warehouse.
IV. The defects revealed during the warranty period will be removed free of
charge in 14 working days. The service will be done by the installation company
due to the terms of included in warranty card. The
elements will be supplied by the Reventon Group producer during the warranty
period.
V. Warranty does not cover the parts of the device subject to normal
maintenance and the cases as below:
a) Mechanical defects, damages from the impact of the improper transportation
or damages through improper storage.
b) Defects through:
- improper usage and service;
- using the device in the improper conditions (too high humidity, too high or too
low temperature, impact of the surrounding, sun etc.) ;
- modified equipment that has been modified or repaired without written
agreement of the producer;
- connecting additional equipment, which is not recommended by the producer
or inconsistent with the technical documentation;
- improper power supply.
c) Elements which wear and tear such as discolor or using.
VI. All changes in record in the warranty terms or any constructive modifications,
independent service outside the Reventon Group service or use, uncaring, makes
the warranty not valid.
VII. To obtain the service it is needed to send to the producer warranty card with
the signature, document confirming the purchase, (copy of the invoice) and
correctly filled the warranty form.
VIII. Not following to any of warranty regulations makes the warranty not valid.
IX. All correspondence, returns, complains should be send to the following
address: Reventon Group Sp. z o.o. 3B Montazowa Street, 43-300 Bielsko-Biała,
Poland or e-mail: [email protected]
The producer reserves the rights to make changes to the technical
documentation without previous notice.
7.
CONNECTION SCHEMES
Independent control switch system
3-stage fan adjustment
Electric valve and thermostat controlled fan
HEAT / COOL switch
ON / OFF switch
Temperature range:
10°C~30 °C
Control accuracy:
<1 °C
Dimensions:
130x85x40 mm
Voltage:
230V / 50~60Hz
Rated current:
3A
Degree of casing's protection:
IP30
Weight:
0,21kg
3-stage speed controllers with thermostat
Controller is used to regulate devices equipped with 3-stage fans.
It has 3-stage speed control and thermostat built in.
In addition, the unit controls the operation of the actuators installed on the control valve.
Works in both heating and cooling modes.
1. Power
2. Main switch, overcurrent circuit bresker*
3. Destratification fan HC-3S
4. 3-step controller with room thermostat HC3S
* main switch and safety fuses are not incouded in the set
