Figure 15. Installing a new
SALON side panel.
PANEL REPLACEMENT
Although your new SALON speakers are preassembled at the facto-
ry, you can replace existing side panels with new ones as follows:
1. Lay a SALON on one side, on a soft surface such as carpeting,
or a thick rug.
2. Use the enclosed hex wrench to untighten the exposed side
panel bolts and remove. Remove the panel and grille.
3. Install a new side panel, as shown in Figure 15. Start all six bolts
(with trim rings) by hand and tighten them with the hex
wrench. Be careful not to overtighten.
4. Lay the SALON on its other side, onto a soft surface. Use the
enclosed hex wrench to untighten the side panel bolts and
remove. Remove the panel.
5. Install the speaker grille, as shown in Figure 16 (on the next
page). Insert the grille tips into panel cups.
Continued on next page...
SALON
Owner’s Manual
19
Bolt
Trim
Ring
Summary of Contents for Salon
Page 1: ...Salon Loudspeaker ...
