Figure 4.The Revel
Performa B15a subwoofer with
its inner packing materials.
4. Place the B15a in the upright position without allowing the
protective bag identified in Figure 4 (above). to become
“stuck” under the spike footing.
5. When the B15a is in the upright position, remove the protec-
tive bag.
Keep all packing materials for future shipping. In the unlikely
event a product will need repair, it is strongly recommended to
package the unit in its original shipping carton. Using any other
packing materials may result in damage to the product and is not
covered by the warranty. See Obtaining Service on page 26 for
additional details.
ADJUSTABLE SPIKE FOOTING
When shipped, adjustable spike footing is attached to the bottom
of the cabinet for optimal stability, accommodating installations on
tile, hardwood, and carpeted floors. The B15a is shipped with
spike footing attached as shown on the left side of Figure 5 at the
top of the next page, with the round end protruding from the
cabinet. The protective cap is placed over the round end to protect
tile and hardwood floors.
NOTE: When moving the B15a, do not drag it across the floor.
If the B15a is placed on a carpeted floor, the spike footing should
be adjusted as shown on the right side of Figure 5 (next page),
with the spike end protruding from the cabinet. If needed, follow
the instructions that begin on the next page to adjust the spike
footing.
Continued on the next page...
REVEL PERFORMA B15a
Owner’s Manual
9
Protective Bag
Top Pad
Bottom Pad
Power Cord
Warranty Card
Owner's Manual
LFO Test Disc