20 //
myrevair.com
• Align the
Key
on the
Hose
with the
Groove
on the
Wand
.
• While holding the
Strain Relief
on the
Hose
in one hand, and the
Wand Neck
in your other hand,
push together firmly.
• Complete a
sharp clockwise turn
to lock the
Wand
into place.
Groove
Key
Reattaching the Wand to the Hose.
Strain
Relief
Cleaning the Wand and/or Hose interior.
TROUBLESHOOTING TIP
NO HEAT?
With the
Wand
set to (
I
) or (
II
), and the
Base
powered on, if
you do not feel heat at the
Wand Mouth
after reassembly, double-check your
Wand
to
Hose
for secure connections.
If you continue to experience issues, please email
or
visit
support.myrevair.com
.
Wand
Neck
Device Care
• If you find it necessary to clean the interior of your
Wand
or
Hose
, we recommend using a damp microfiber towel or
sponge brush.
• After removing the
Wand
from the
Hose
, gently swab the
interior of the
Wand
and/or
Hose
.
• Do not run water or cleaner through the
Wand
or
Hose
.
• Do not force anything through the
Wand
or
Hose
to avoid
internal damage to the components.
• Allow all components to air dry completely before
reassembly.
Summary of Contents for Reverse-Air Dryer
Page 2: ...20200825 RA80006 REV 3 0...
