REV Robotics UltraUSB Quick Start Manual Download Page 4

Page: 4 / 9

REV-31-1592-QS-1

USING THE ULTRAUSB HUB

This section of the guide will cover cable types, how to connect and swap cables, and details on the powering options.

2.1

CABLE TYPES AND INFORMATION

Cable

Type

Uses

JST-PH 4-pin to USB-A Cable

Data

Connecting to any USB-A Device
(i.e. a laptop)

JST-PH 4-pin to USB Micro-B
OTG Cable

Data

Connecting to a Micro-USB Phone
(OTG)

JST-PH 2-pin to 3-pin 0.1"
(PWM/Dupont) Connector Cable

Power

Powering the hub off the 5V rail on
the Expansion Hub/Control Hub

Summary of Contents for UltraUSB

Page 4: ... details on the powering options 2 1 CABLE TYPES AND INFORMATION Cable Type Uses JST PH 4 pin to USB A Cable Data Connecting to any USB A Device i e a laptop JST PH 4 pin to USB Micro B OTG Cable Data Connecting to a Micro USB Phone OTG JST PH 2 pin to 3 pin 0 1 PWM Dupont Connector Cable Power Powering the hub off the 5V rail on the Expansion Hub Control Hub ...

Page 5: ...ower Powering the hub off a 5V external battery pack with USB A connectors 2 2 INSERTING CABLES In addition to the materials included in the kit you will also need a 5 5mm Nut Driver or equivalent sized tool Step 1 Using a 5 5mm Nut Driver or equivalent tool remove the cable cover ...

Page 6: ...obotics LLC 6 Step 2 Insert the data cable into the hub If you have trouble inserting the connector you can use a small flathead screwdriver to push the connector in Step 3 If you are using a power cable insert the power cable into the hub ...

Page 9: ...REV 31 1592 QS 1 Copyright 2019 REV Robotics LLC 9 APPENDIX A SETUP EXAMPLES APPENDIX A 1 OPERATING A UVC CAMERA ON YOUR ROBOT APPENDIX A 2 USING TWO GAMEPADS WITH YOUR DRIVER STATION ...