2/25/2013
Retsch GmbH
8
0002
Technical data
Machine type designation:
TG200
Use according to the intended purpose
Depending on the specific properties of the material to be dried,
materials with a moisture content of max. approx. 80% can be
dried. The size of the batch is normally 1000 ml. In some cases,
e.g. with lightweight, high volume materials, the complete vessel
volume can be utilized. The minimum grain size should not be
less than 63 µm.
The TG200 is not designed as a production machine or for
continuous operation but as a laboratory machine, intended for
one shift operation of 8 hours.
Do not make any alterations to the machine and use only spare
parts and accessories approved by Retsch.
Otherwise the Declaration of Conformity with European
directives made by Retsch will lose its validity.
Furthermore this will also lead to the loss of any
guarantee claims.
Do not dry explosives, easily flammable materials or materials
with a f lashspoint below 180°C in the TG200.
Risk of fire and explosion.
Do not operate the TG200 in the vicinity of easily flammable
materials.
Risk of fire and explosion
You must check to what extent toxic danger exists through the
charged material.
Risk to health through vapours or residual dusts which
are not retained by the filters.
Do not operate the TG200 without supervision.
Risk of fire and explosion.
Materials should be dried only in the appropriate time, at the
appropriate temperature. Take into consideration the melting
point and temperature sensitivity of the material.
The material to be dried can be destroyed through
overheating.