Retsch RS 300, Manual

Page: 31 / 49

Operating the Device
31
6.10 Optional autolifter for removing heaving grinding sets
Fig. 17: Image of the autolifter
– The autolifter is attached by a bracket on the side of the machine and supplied with air.
– Using the buttons shown in the image, the support tool can be moved upwards or
downwards. This enables the grinding jar to be placed effortlessly and ergonomically into
the mill and to be removed from the mill again.
– The Autolifter can be adjusted to the volumes specified above with the help of small adapter
pieces.
– The Autolifter is available for volume sizes of 800 / 1000 / 2000 ml.