Retsch MM 500 Vario, Manual

Page: 63 / 87

Device control
63
Fig. 35: Cycle mode after starting the grinding process
Element Function
NB1 Main menu To return to the main menu.
ZN Cycle number Displays the number of the current cycle.
PE Parameter settings Displays the parameters of the active cycle.
ZW Cycle repeats Displays how often the configured cycle is repeated until the
grinding process is finished.
ZWM Status of cycle repeats After the start of the grinding process, the current status of
the cycle is displayed here.
BL Scroll bar Indicates the position of the cycle.
GS4 Editor mode Opens the cycle editor.
PS Parameter sets (A/B) A cycle is divided into parameter sets A and B.
DZ Total duration of the
cycle Displays the total duration of the complete cycle until the
grinding process is finished.
GS1 Start cycle Starts the grinding process or the cycle.
GS2 Pause cycle Pauses the current cycle.
GS3 Stop cycle Stops the current cycle.
7.10.1 Selecting the cycle
Cycles with preset parameters for the grinding process can be selected in cycle mode. To
select a cycle, press the button in the main menu. The respective cycle number is
displayed next to the symbol.
GS2 GS3
ZN
PE
PS
DZ
ZWM
1 / 3