Retsch AS200 tap, Manual

Page: 8 / 48

Notes on the Manual
8
NOTICE
N1.0000
Type of property damage
Source of property damage

Possible consequences if the notices are not observed.
•
Instructions and information on how the property damages are to be
avoided.
Property damages may result from disrespecting the notice. However, there exists no risk of
an injury to personnel. Additionally, in continuous text or action instructions the signal word
NOTICE is used.
1.4 General Safety Instructions
WARNING
W2.0012
Serious personal injury
Incomplete device

There is a risk of serious personal injury during the commissioning without
proper installation of the protective guards.
•
During installation, care must be taken to ensure that all necessary
protective guards are properly installed in accordance with the
harmonized standard DIN EN ISO 12100.
•
The commissioning of the incomplete device is prohibited until it has
been completed by the components mentioned in the Declaration of
Incorporation and complies with the regulations of the Machinery
Directive and an EC Declaration of Conformity has been obtained in
accordance with Annex II Part A.
CAUTION
C2.0002
Read the manual
Non-observance of the manual

The non-observance of this manual can result in personal injuries.
•
Read the manual before using the device.
The Tap Sieve Shaker AS 200 tap of Retsch GmbH is delivered with a Declaration of
Incorporation according to the Machinery Directive 2006/42/EC, Annex II, Part B.
NOTICE After the protective guards have been installed by the operator (owner), the safety plug
must be connected for commissioning (

Chapter " Connecting the Safety Plug ").
Target group:
All persons concerned with this device in any form.
This device is a modern, high performance product from Retsch GmbH and complies with the
state of the art. Operational safety is given if the device is handled for the intended purpose and
attention is given to this technical documentation.