Controlling the Device
32
7
Controlling the Device
7.1 Operating Controls, Displays and Functions
Fig. 13:
Operating controls and functions
Element Description
Function
H1
STOP
Stops the sieving process. In standby mode, the red
LED is lit
H2
START
Starts the sieving process. During operation, the
green LED is lit
H3
Minus button of the time
setting
Reduces the sieving time in the range between 1 and
99 minutes
H4
Plus button of the time
setting
Extends the sieving time in the range between 1 and
99 minutes
7.2 Start Process
To start the sieving process in the
, simultaneously press the
button (
H2
)
and the push button START (
G
).
If the device is in
, simultaneously press the
button (
H2
) and the push
button START (
G
)
twice
to start the sieving process.
The green LED lights up and the sieving process is started with the current settings.
7.3 Stop Process
The sieving process will stop automatically after the set process time has elapsed. However, the
sieving process can be stopped manually at any time.
Press the
button (
H1
)
twice
to stop the sieving process.
7.4 Pause Process
The sieving process will stop automatically after the set process time has elapsed. However, the
sieving process can be interrupted manually at any time.
Press the
button (
H1
)
once
to interrupt the sieving process.
H1
H2
H4
H3
Summary of Contents for AS200 tap
