Cleaning, Wear and Maintenance
46
11 Cleaning, Wear and Maintenance
11.1 Cleaning
WARNING
W7.0003
Danger to life through electric shock
Cleaning with water
An electric shock can cause burns, cardiac arrhythmia, respiratory arrest,
as well as cardiac arrest.
•
The power cable must be unplugged before cleaning the device.
•
Use a cloth dampened with water for cleaning.
•
Do not clean the device under running water!
NOTICE
N14.0009
Damage to the housing and device
Use of organic solvents
Organic solvents may damage plastic parts and the coating.
•
The use of organic solvents is not permitted.
Clean the housing of the device with a damp cloth and if necessary, with a household
cleaning agent. Pay attention that no water or cleaning agent enters the interior of the
device.
Clean the nozzle chamber (
A
) and the air outlet duct (
E
) with a paint brush and vacuum the
loosened material residues with the industrial vacuum cleaner. To do so, the industrial
vacuum cleaner can be switched on separately via the control unit (
Chapter "
").
Alternatively, the nozzle chamber can also be cleaned with compressed air.
If necessary, exchange the vacuum cleaner bag or empty the collecting container of the
industrial vacuum cleaner.
Check the degree of contamination of the vacuum cleaner filters at regular intervals and
replace them if necessary.
CAUTION
C12.0031
Risk of injury
Cleaning with compressed air
When using compressed air for cleaning purposes dust and remnant of
the sample material can be flung around and injure eyes.
•
Always wear safety glasses when cleaning with compressed air.
•
Observe the material safety data sheets of the sample material.
11.1.1 Cleaning of Test Sieves
Test sieves are measuring instruments and should be treated with due care before, during and
after the sieving process. It is recommended to clean new test sieves before the first use from
possible preservative residues with ethanol or isopropanol and to store them in a dry, dust-free
place when unused.
Summary of Contents for AS 200 jet
