Retrotec Energy Innovations, Ltd.
33
DM-2A Mark II 2008-02-22
Section 5
Using Advanced Configuration
Modes
The DM-2A mark II gauge has several different pre-programmed test measurement mode
configurations that enable you to quickly calculate various measurements in the field.
Accessing Configuration Modes
By default, your gauge comes configured with a number of commonly used modes pre-
enabled. However, if you need to you can change the enabled modes or their displayed units
at any time. For example, to meet a specific requirement or preference you can display pressure
values in
PSF
instead of
Pa
. These types of configuration changes are simple and straightforward
to perform.
To quickly access and/or change measurement mode configurations, follow these brief steps:
1. Press the
S
etup
button, select
Mode Setup
, and press
e
nteR
to view the
Enable/Disable
Modes
menu screen.
2. Navigate to select a mode in the list using the (Up) and/or (Down) keypad
buttons.
3. To cycle through the unit measurement types for available modes press the
e
nteR
,
(Up) and/or (Down) keypad buttons. Choosing
Off
disables the selected mode.
4. To change pressure values associated with specific modes press the
e
nteR
keypad
button, enter the pressure value, and press
e
nteR
again to apply the change.
5. Press the
e
xit
keypad button twice to return to the main menu.
For detailed steps on setting device modes, see
Enabling and Disabling Devices
in
Section
2, Working with the Setup Screen
.
DM-2A Mark II Dual-Channel Pressure Gauge
User Manual
5:
Advanced Modes
Summary of Contents for DM-2A mark II
Page 1: ...Retrotec Model DM 2A mark II Dual Channel Pressure Gauge User Guide ...
Page 59: ......
Page 60: ......
