background image

RETROSPEC ACCESSORY HITCH CARRIER LIMITED WARRANTY

TERMS & CONDITIONS:

The product is warranted against defects in the materials and workmanship for the useful 

life cycle of the product. All products have a useful life cycle. Once the product has 

reached the end of its lifecycle it will no longer be eligible for warranty replacement or 

adjustments. 

This warranty applies to the original retail purchaser and is non-transferable.

When contacting us for a warranty issue an original proof of purchase is required clearly 

identifying the product.

The product must be returned to Retrospec for inspection along with copies of the 

original proof of purchase. The owner of the product is responsible for shipping costs.

Should Retrospec determine that the product or any of its components are covered by 

this warranty, Retrospec’s determination of the product’s eligibility for warranty repair or 

replacement is final and binding.

If, at the time of replacement, Retrospec does not have available the same product, the 

consumer may be offered a substitute product of equal or better value.

ITEMS NOT COVERED BY THE LIMITED WARRANTY:

Damage due to improper assembly

Damage due to mounting the rack on the back of a trailer, Recreational vehicles, or to 

bumper hitch adapters.

Normal wear and tear

Damage due to lack of maintenance

Damage due to installation of non-original parts, components, or accessories

Damage due to loading of the bicycle carrier with non-standard bicycles, items that are 

not standard bicycles, or any product that exceeds the stated weight capacity of the 

bicycle carrier.

Damage or failure due to improper use, accidents, neglect, or failure to follow the 

instructions provided with the product.

The paint and finish of the bicycle carrier.

Damage to bicycles or automobile

Damage or injury due to the rack or bicycles falling from the car.

Retrospec grants the original purchaser of a new Retrospec accessory hitch carrier a non-transferable limited lifetime warranty subject to the limitations, terms and condi-
tions stipulated below. 

This warranty is expressly in lieu of all other warranties. Any implied warranties of merchantability or fitness for a particular purpose created hereby are limited to the same duration as the express warranty herein. This warranty is void in its 

entirety if the product is modified in any manner. All provisions in this limited warranty are separate and severable. If any provision is held invalid and unenforceable, such determination shall not affect the validity or enforceability of the 

other provisions hereof. Except to the extent specifically prohibited by law, Retrospec shall in no way be responsible for direct, incidental or consequential damages, including, without limitation, damages for personal injury, property 

damage, or economic losses whether based on contract, warranty, negligence, product liability, or any other theory.

Summary of Contents for LENOX






Reviews: