background image

OWNER’S MANUAL

R E T R O S P E C   I S U P   I N T E L L I G E N T   E L E C T R I C   P U M P  

This manual contains safety, assembly, use, and maintenance 

instructions. Read these instructions carefully before use and 

keep them for future reference. Your safety may be affected 

if you do not follow these instructions.

20.0

0

PSI/B

AR

+

-

1

Introduction

The Retrospec iSUP Intelligent Electric Pump features an intelligent 12 volt DC electric pump with preset pressure LCD screen. With the intelligent pressure system, 

you preset a pressure value, when preset pressure is reached, the pump will automatically stop inflating.

2

What’s in the box

3

2

1

3

Parts,Features, Controls

– Inflation Inlet

– Deflation Outlet

– DC Plug

– Pressure Value LCD Screen

– Pressure Unit Toggle Button

– Inflation Button

– Deflation Button

– On/Off Button

– Flex-Hose

– Air Tap

– Flexible Conduit Adapter

1

2

3

4

5

6

7

8

9

10

11

Air Pump

Flex-Hose with fittings

Owner’s Manual

    WARNING

1

2

3

4

5

6

7

8

9

10

11

Summary of Contents for iSUP

Page 1: ...es an intelligent 12 volt DC electric pump with preset pressure LCD screen With the intelligent pressure system you preset a pressure value when preset pressure is reached the pump will automatically stop inflating 2 What s in the box 3 2 1 3 Parts Features Controls Inflation Inlet Deflation Outlet DC Plug Pressure Value LCD Screen Pressure Unit Toggle Button Inflation Button Deflation Button On O...

Page 2: ... of the product you wish to inflate Exceeding the maximum pressure may damage the product and cause injury to yourself and those near you Before using check the cigarette lighter socket to make sure there is no rust residue or obstructions A cigarette lighter socket with poor electrical conduction may cause overheating of the product and or power source which can damage the product and or vehicle ...

Page 3: ... by default NOTE After powering on if not used within 2 minutes the pump will enter standby mode Restart the pump by pressing the On Off Button PSI BAR 6 Deflation Operation WARNING 1 Remove the hose from the Inflation Inlet 1 See 1 then reconnect it to the Deflation Outlet 2 twist clockwise to tighten See 2 2 Attach the other end to the paddleboard Press the On Off Button to start the deflation d...

Page 4: ... 1 Make sure that the power wire is plugged in the 12V DC socket 2 Change the fuse 3 Cool the motor and restart it 4 If the problem cannot be solved please contact local service agents or similar authorized personnel to change the product 30 minute cooling 1 Clear hose blockage Repair replace damaged hose 2 Reinstall the hose 3 If the problem persists contact local service professionals or similar...

Reviews: