Radio Presets
Redondo Mode
To set up your radio to function with the Redondo Thumb-Roller controls, press and hold
the Left-Inside Thumb-Roller(
1
) for approximately 15 seconds to reboot the radio into SEL
PANEL mode. While holding the Thumb-Roller the unit will display the following sequence:
RETROSOUND>RADIO>GOODBYE>SEL PANEL. Once
SEL PANEL
is displayed, press
and release the Left-Outside Thumb-Roller(
2
) to cycle through the choices until
REDONDO
appears. With REDONDO displayed on the screen let the unit time out to set.
Thumb-Roller Quick Start Guide
Modern Sound For Your Classic
[email protected] | help.retromanufacturing.com
Power On/Off
Press the Left-Inside Thumb-Roller(
1
) to power the unit on.
Press and hold the Left-Inside Thumb-Roller(
1
) to power the unit off.
Volume
Rotate the Left-Outside Thumb-Roller(
2
) up or down to change the volume.
Changing Source Modes
Rotate the Left-Inside Thumb-Roller(
1
) down to cycle through the source modes.
Changing Radio Bands
Rotate the Right-Inside Thumb-Roller(
3
) up to cycle through the radio bands.
Tune
Rotate the Right-Outside Thumb-Roller(
4
) to scroll through the stations.
Mute On/Off
Press the Right-Outside Thumb-Roller(
4
) to mute and unmute.
Equalizer (EQ)
Press the Left-Outside Thumb-Roller(
2
) to enter the Tone Control sub-menu. Press and release the
Left-Outside Thumb-Roller(
2
) until you see the EQ setting you’d like to adjust. Rotate the Left-Outside
Thumb-Roller(
2
) up or down to adjust the setting. Press the Left-Outside Thumb-Roller(
2
) to move to
the next item, and repeat to adjust each option. Let the unit time out to set.
Setting the Clock
Press and hold the Right-Inside Thumb-Roller(
3
) to enter the System Settings sub-menu. Rotate
the Right-Outside Thumb-Roller(
4
) to cycle through the choices until you see CLK, then press
the Right-Outside Thumb-Roller(
4
) to select. Rotate the Right-Outside Thumb-Roller(
4
) up or
down to adjust the hours. Then press the Right-Outside Thumb-Roller(
4
) again to move on to
minutes. Rotate the Right-Outside Thumb-Roller(
4
) up or down to adjust the minutes. Let the unit
time out to setup .
Display Color*
Press and hold the Right-Inside Thumb-Roller(
3
) to enter the System Settings sub-menu. Rotate
the Right-Outside Thumb-Roller(
4
) to cycle through the choices until you see SCAN, then press
the Right-Outside Thumb-Roller(
4
) to cycle through the colors. Let the unit time out to set.
Beep On/Off
Press and hold the Right-Inside Thumb-Roller(
3
) to enter the System Settings sub-menu. Rotate
the Right-Outside Thumb-Roller(
4
) to cycle through the choices until you see BEEP ON/OFF,
then press the Right-Outside Thumb-Roller(
4
) to choose between BEEP ON or BEEP OFF. Let
the unit time out to set.
Setting Radio Presets
To set a preset, tune to the station you want to set the preset to, and then press and hold the
desired Preset Button(
5
) for two seconds.
Recalling Radio Presets
To recall a preset, simply press the Preset Button(
5
) your station was set to previously.
1 Left-Inside
Thumb-Roller
5 Preset Buttons
Right-Outside
Thumb-Roller 4
2 Left-Outside
Thumb-Roller
Right-Inside
Thumb-Roller 3
*Some features are not available on all radios.
