RETROPIE OPERATION
Section 2
(1) Turn your television on.
(2) Set your TV to the HDMI source.
(3) Plug in AC adapter to Control Deck and wall outlet.
Make sure the red power indicator light and the green ac-
tivity light on the front of the Control Deck are on (check
the AC adaptor and plug if not).
(4) Use the D-pad on controller #1 to find the console you
want, then press the A button to select it .
(5) Use the D-pad on controller #1 to navigate the game list
and the A button to select a game you want to play. Use
the B button to return to the console list.
EXITING GAMES
(1) Save your game before exiting.
(2) Press the Select button and the Start button simultaneously
on controller #1.
—OR—
Press the Escape key on an attached keyboard.
CONFIGURING NEW CONTROLLERS
RETURNING TO REGULAR TV
After you have finished playing, press the start button on the
console or game list menu. Navigate to Quit and select Shut-
down System. Select Yes when asked if you really want to shut-
down. Wait for the system to shutdown and confirm by check-
ing to make sure the green activity light on the front of the
Control Deck is off. Remove the AC adapter from the power in-
put on the Control Deck. Turn your TV selector to the desired
channel to view regular TV programs.
NOTE: This process is necessary to keep the operating system
from being corrupted due to sudden power loss.
(1) Insert the new controller’s USB into an empty port
on the Control Deck.
(2) Hit the Start button on an already configured con-
troller and select Configure input in the menu.
(3) Follow the prompts on the new controller. If you do
not have a button to correlate, hold down any
button until it dismisses the current prompt.
(4) Hit OK.