5
HINTS FOR BEST RECEPTION:
-
-
FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE
REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND
EXTENDED FOR BEST RECEPTION.
STEREO PHONOGRAPH OPERATION
Please Note - Before Use
-
Remove the stylus protector.
-
Make sure that the tone arm is unlocked and free to move
from the tone arm rest prior to operating. Lock the tone arm
again when not in use.
1. Turn on the unit by Power On/Off (10) and slide the Function switch (4) to PHONO
position
2. Raise the turntable dust cover.
3. Place the record on the platter (use the 45 RPM record adaptor (12) if you are playing
45 RPM records).
4. Set the speed selector (13) to the proper position for the record you are playing.
5. Lift the tone arm from the rest (15) and slowly move it over
the record. The platter will begin spinning.
6. Place the tone arm down onto the record in the location that
you want to play.
7. Adjust the volume (10) to the desired level.
8. At the end of record, the platter will automatically stop
spinning. Lift the tone arm from the record and return it to the rest.
9. To stop playing manually, lift the tone arm from the record and return it to the rest.
NOTE:
Some types of records may have an auto-stop area outside the preset limit, so
the turntable may stop before the last track finishes. In this case, set the AUTO-STOP
switch to the “OFF” position. This allows the record to play to the end, but please note
that it will not stop automatically. You must manually raise the tone arm and place it back
in the rest and then turn off the power to stop the turntable from spinning.
BLUETOOTH CONNECTION AND PLAYBACK
1. Turn on the unit by Power On/Off (10)
2. Slide the Function switch (4) to BT position.
3. The Bluetooth LED indicator (7) will be flashing, it means the Bluetooth in non
connection / searching mode.
4. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and
select “ Retrolife ” Bluetooth equipment to connecting.
5. Once the connection was finished and connected successfully, the Bluetooth LED
indicator (7) will light up.
6. Adjust the volume (10) to the desired level.
7. Start to playback your Bluetooth device and enjoy the music by the main unit.
Remark:-
-
To disconnect the Bluetooth connection, slide the Function switch (4) to PHONO
position, or turn off the Bluetooth feature of your Bluetooth device.
