Credits
•
Nate Lawson designed the ZoomFloppy over several years. He built the prototype boards
and wrote the firmware, OpenCBM plugin, nibtools mods, and this manual.
•
Jim Brain at RETRO Innovations did the PCB design, manufacturing, and hardware sales
and support.
•
Wolfgang Moser provided design advice and lots of debugging assistance with his
complex drive setup.
•
Christian Vogelsgang did the Mac port and was an early tester.
•
Spiro Trikaliotis, Thomas Winkler, Joe Forster, and Thomas Kindler all helped review
changes and provide advice, in addition to other code they’ve written.
•
Peter Rittwage continues to update nibtools to support reading/writing protected disks.
Original code for mnib was by Markus Brenner.
•
Dean Camera provided the very useful LUFA AVR USB library
