background image

Warranty

If your product does not work properly because of defects in materials or workmanship, Retro Manufacturing, LLC (collectively referred to as 
the “warrantor”) will for the length of One Year, which starts with the date of original purchase (“warranty period”), at its option either (a) 
repair your product with new or refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair or replace will be 
made by the warrantor. 

To handle warranty issues, contact us at [email protected] or call 702.483.2222. All returns and warranty issues must be 
accompanied by a Return Authorization (RA) number along with a copy of your original purchase receipt. Any items sent to us without 
a RA number and copy of the receipt will be refused. Once an RA number is issued, send the product along with the original sales 
receipt to the address above.

www.retromanufacturing.com

7470 Commercial Way

Henderson, NV 89011

702.483.2222

Summary of Contents for PA-01

Page 1: ...one is needed 1 Removing the Old Antenna a Disconnect the battery before you begin Gain access to the underside of the fender area through the trunk fender splash panel etc b Remove and disassemble the old antenna and base Retain the old base and mounting parts for your reference In some cases you can reuse them if you wish to keep the old look Remove the mounting bracket drain tube electrical wir...

Page 2: ...ide of the fender tighten the mounting nut firmly to secure the antenna assembly Do not over tighten the nut Over tightening the nut may strip or break the mounting threads or damage the contact spring causing improper antenna operation i Attach the drain tube to the bottom of the motor assembly and route it to the outside of the car Avoid kinking or bending the drain tube see Figure 2 j Route the...

Page 3: ...PA 01 PA 03 FIGURE 3 Black to chassis ground from antenna Red battery 12 volt wire from antenna Blue switched wire to antenna lead Coaxial cable from antenna Antenna input 5 amp fuse to red wire Radio Fuseblock Fuseblock Switched Switched wire from radio Ignition switch Unswitched PA 03 PA 01 Battery Replacement Antenna Masts Replacement antenna masts are available To purchase a replacement mast c...

Page 4: ...shed product The decision to repair or replace will be made by the warrantor To handle warranty issues contact us at tech retromanufacturing com or call 702 483 2222 All returns and warranty issues must be accompanied by a Return Authorization RA number along with a copy of your original purchase receipt Any items sent to us without a RA number and copy of the receipt will be refused Once an RA nu...

Reviews: