Page 27
Picture 4.1 Record Config
【
Channel
】
Choose the corresponding channel number to set the
channel. Choose the all option to set the entire channels.
【
Redundancy
】
Choose the redundancy function option to implement
the file double backup function. Double backup is writing the video
files in two hard disks. When you do the double backup, make sure
that there are two hard disks installed. One is read-write disk and the
other is redundant disk. (Refer to 4.5.1)
【
Length
】
Set the time length of each video file. 60minutes is default
value.
【
Prerecord
】
Record 1-30 seconds before the action. (Time length is
decided by the code stream)
【
Record mode
】
Set video state: Schedule, manual or stop.
Schedule:
Record according to the set video type (common, detection
and alarm) and time section.
Manual:
Click the button and the according channel is recording no
matter the channel in any state.
Stop:
Click the stop button and the according channel stops recording
no matter the channel in any state.
【
Period
】
Set the time section of common recording, The recording will
start only in the set range.
【
Record type
】
Set recording type: regular, detection or alarm.
Regular:
Perform the regular recording in the set time section. The
video file type is “R”.
Detect:
Trigger
the “motion detect”, “camera mask” or “video
Summary of Contents for B series
Page 1: ...Page 0 ...
Page 73: ...Page 72 ...
