RetiC
AM
RetiCAM MT-01
Tabletop Tripod
Standard 1/4”-20 Tripod Screw
Safety
• Always ensure that the tripod head and legs
are locked tightly and the tripod is resting firmly
on a level surface before using your Tripod.
• Avoid leaving tripod unattended or in areas
where people could trip over.
• To raise the tripod, extend the largest
diameter leg sections first and raise the Center
Column only when necessary.
• Do not exceed the maximum specified load
capacity. Do not use the tripod when
temperature is below −20°C or above 70°C.
• Always clean and dry the tripod after it has
been exposed to wet, dusty, sandy or salty
conditions.
• Detach mounting plate from base before
mounting a camera to the plate.
• Do not lift or move the tripod by holding the
tripod head only.
• Remove camera or other equipment from
tripod when transporting.
Features and Components
Mounting Plate Release/Lock
Pan Head Lock
Quick Flip Leg Lock
Quick Release
Mounting Plate
Left/Right Tilt Lock
Tilt/Pan Handle Bar
Center Column Lock
Center Column Crank
Mid Level Spreader
Rubber Foot
