4
(6UX'''RQGROTK
,OM[XK
,OM[XK
,OM[XK
,OM[XK
or
Open the Battery Door
1. open the Battery door latch ,
2. remove the battery compartment door.
Caution: Exercise care when removing Li-ion or AA
Alkaline batteries. Do not use sharp or conductive
tools to remove either of these batteries. Remove the
batteries before storing your radio for extended periods
of time. Batteries corrode over time and may case permanent
damage to your radio.
Installing the Battery
1. To remove the battery compartment door, Prepare the batteries.
2. Insert BP-1 Li-ion battery pack or 3 AAxAlkaline batteries,Ensuring that the poles
are correctly aligned.
Attaching the Belt Clip (Figure 1)
Attach the belt clip to the radio plate at
the back of the radio until the clip clicks
in place.
The Antenna Information (Figure 2)
The antenna is fixed antenna and can
not be disassembled.
Installing the Earpiexe (Figure 3)
Open the cover of the earpiece jack, align the
connector and push fully in.
Micro-USB Charger (Figure 4)
As shown in right Figure When the charge is
starting, the Status LED turns red, when
charge finishes it turns green. Pull out the
USB charging cable.
Monitor Function
Monitor Function Enables you listen for
weak signals on the current channel. If
necessary, you can pressand hold LED
button to check for activity on the current channel before you talk. Press and hold
SOS Button enter the Monitor mode, release exit the mode.
Scanning Channel
Turn the channel selector to channel 16,the transceiver will automatically detect the
activities of scanning channel from 1 to 15.
Voice Operated TX
You can transmit hands-free more reliable with the use of optional headset accessories.
Once VOX is turned on ,the radio detects your voice and transmits when you speak .
(set via software).
CTCSS / DCS
Using these features does not mean that others won’t be able to listen in on your
transmissions.
They only provide a method to filter out unwanted incoming transmissions.
CTSS/DCS only could be changed via program software.
SOS Alarm Function
Press and hold SOS to activate the alarm function.Press SOS
(
a short press) again
to turn it off.
Push-to-talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a continuous
warning tone and stops transmitting if you press the PTT button for 180 continuous
seconds.
3
