Basic operations
Icon
Operation instruction
Turn on: turn the [Power/Volume] knob clockwise until you hear "click"
Turn off: turn the [Power/Volume] knob counterclockwise until you hear a click
After power on, rotate the [Power/Volume] knob to increase or decrease the volume
After power on, press [▲] or [▼] to select your desired channel or frequency.
※
After power on, rotate [Channel Selector] knob to select your desired channel or frequency.
Note
：
The operation item with the symbol "
※
" depends on the product model which has the function is valid or
equipped with this part.
PTT call
To ensure an optimal transmission, hold the radio in a vertical position at one to two inches (2.5 to 5.0
centimeters) away from the mouth.
Digital channel call
Digital calls are made as a group call, private call or All Call based on the programming of the radio. An individual
channel may be preset to one of these calling functions.
Analog mode initiating and receiving calls (no signaling)
You can initiate calls to all users on the current analog channel by holding down the [PTT] key.When the call is
initiated, the TFT display displays shows
;The display shows
when you receive calls from other
users on the current analog channel.
Access menus and operations
You can access the main menu and sub-menu options of the radio through the following steps, as well as
Call type
Private call
Group call
All call
Operation method
Making call
Receiving call
In standby mode, press [PTT] key
to initiate the call.When a call is
initiated, the screen displays:
When initiated a group call, the
screen displays:
When Initiated an all call, the
screen displays:
When a private call received, the screen
displays:
When a group call received, the screen
displays:
When an all call received, the screen
displays:
05
