antenna gain shall not exceed the specified gain by
the manufacturer declared.
•DO NOT transmit for more than 50% of total radio
use time, more than 50% of the time can cause RF
exposure compliance requirements to be exceeded.
•During transmissions, your radio generates RF en-
ergy that can possibly cause interference with other
devices or systems. To avoid such interference,turn
off the radio in areas where signs are posted to do so.
•DO NOT operate the transmitter in areas that are
sensitive to electromagnetic radiation such as hos-
pitals, aircraft, and blasting sites.
•Portable Device, this transmitter may operate with
the antenna(s) documented in this filing in Push-to
-Talk and body-worn configurations. RF exposure
compliance is limited to the specific belt-clip and
accessory configurations as documented in this
filing and the separation distance between user and
the device or its antenna shall be at least 2.5 cm.
•Mobile Device, during operation, the separation
distance between user and the antenna subjects to
actual regulations, this separation distance will ens-
ure that there is sufficient distance from a properly
installed externally-mounted antenna to satisfy the
RF exposure requirements.
•Occupational/Controlled Radio, this radio is design-
ed for and classified as “Occupational/Controlled
Use Only”, meaning it must be used only during the
course of employment by individuals aware of the
hazards, and the ways to minimize such hazards;
NOT intended for use in a General population/
uncontrolled environment.
•General population/uncontrolled Radio, this radio is
designed for and classified as “General population/
uncontrolled Use”.
Dispose of them according to the laws in your area.
IC Requirements:
Licence-exempt radio apparatus
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Indus-
trie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouil-
lage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF Exposure Information
•DO NOT operate the radio without a proper antenna
attached, as this may damage the radio and may also
cause you to exceed RF exposure limits. A proper
antenna is the antenna supplied with this radio by the
manufacturer or an antenna specifically authorized
by the manufacturer for use with this radio, and the
5
Summary of Contents for RB16
Page 1: ...RB16 Walkie Talkie US...
