Retevis RA15, User Manual, Page: 13 / 22

Hazards Radio Icon
NOAA* All Hazards Radio Channels
Weather (WX) Alert Mode
During scanning (while receiving an incoming transmis-
sion), you can choose from the following:
a.Press the Menu/Power button to enter the new setting
and proceed to other functions.
b.Press and hold the Menu button to enter the new
setting and return to Standby mode.
c.Press PTT or Call/Lock button to enter the new setting
and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the
new setting and return to Standby mode.
You can use your radio to listen to NOAA All Hazards
Radio channels transmitting in you area.
To listen to All Hazards Radio channels:
1.Press the Weather (WX) button until the All Hazards
Radio icon and the currently selected All Hazards Radio
Channel are displayed.
2.Use the Up or Down button to change All Hazards
Radio channels.
3.The All Hazards Radio icon will continue to be
displayed when All Hazards Radio is on.
4.To exit All Hazards Radio, press and hold the Weather
button until On or Off is displayed.
*National Oceanographic and Atmospheric Administration
Hazards Radio Icon
Turning On the Weather Alert function will allow your
radio to automatically receive NOAA Hazard Alert radio
signals and warnings from designated NOAA broadcast
stations. If the radio is turned ON, it will alert to Weather
and other emergency alerts broadcast by NOAA.
To turn Weather Alert On or Off:
1.Press the Weather/SCAN button until the Weather Alert
icon flashes on the display. The current On or Off setting
is displayed.
2.Press the Up and Down button to turn Weather Alert On
or Off.
3.Press and hold the Weather/Scan button again to save
the new setting and exit the Weather Alert Mode and
return to Standby mode.
This radio is rain resistant to JIS4 standards.
11