5
© Retell 2002
Advanced Controls
If after setting-up the Intelligent Recording Interface as above you are not entirely satisfied
with the recording quality then the explanations below will help you to adjust every aspect of
the Intelligent Recording Interface. You will need to use the tool supplied to adjust these
controls.
Adjuster A adjusts the
earpiece level that you hear in
the handset or headset.
This should be adjusted to a
comfortable level.
Adjuster B adjusts the level of beep injection, this is
where if both parties go silent during a conversation the
connector injects a beep and if it hears its own beep it
knows the phone is off hook and the recorder will still
record. This allows you to record pauses in a
conversation.
Adjuster C adjusts the
volume of your voice
that is recorded on the
tape, if the far party is
recorded louder than
the near party then
turn C clockwise.
Adjuster D adjusts the
volume of the far party
that is recorded on the
tape, if the near party is
recorded louder than the
far party then turn D
clockwise.
Handset Type. This has
been preset to 1 for the
most common type of
handset wiring but if
this is not right for you
then just change to any
of the 5 other settings
until your phone
handset works.
By adjusting C or D it is possible to get a
perfectly balanced recording.