5.F05: Delete Time Setting
Long press and hold “SET” button 3 seconds to enter main setting menu, then press “UP/DOWN” button to select menu F05
，
short press “SET” button to enter F05 submenu, the display shows “000” (Default don't delete)
，
000-999 seconds, then press
“UP/DOWN” to setup relevant seconds to automatic delete calling history (short press UP/DOWN once to add/reduce 10
seconds). Short press “SET” button to confirm. After program, press “BACK” button to previous menu or press “BACK” button
twice to exit to standby.
6.F06: Key Switch
Long press and hold “SET” button 3 seconds to enter main setting menu, then press “UP/DOWN” button to select menu F06
，
short press “SET” button to enter F06 submenu, the display shows “00” (Default), then press “UP/DOWN” to choose relevant
key value and then press relevant key on the transmitter. After program, press “BACK” button to previous menu or press
“BACK” button twice to exit to standby.
00 Order
01 Call
02 Check Out
03 Cancel
04 Bill 05 Pay
06 Service
07 Water
08 Coffee
09 Beer 10 Satisfaction 11 Dissatisfaction
12 Emergency
13 Doctor
14 Nurse
15 Change Medication
16 Pulling Needle
Note: Before switch keys value of transmitter, please add relevant transmitter at first.
7.F07: RFID Registration
•
Add RFID Card
Long press and hold “SET” button 3 seconds to enter main setting menu, then press “UP/DOWN” button to select menu F07
，
short press “SET” button to enter F07 submenu, the display shows “01” (Default), then press “SET” button at the right side of
the screen and after prompt voice “Swipe RFID Card” , put RFID card to sweep the middle of right side of the screen.
The speaker will sound “successfully registration” to confirm registered successfully. After program, the number will be
increased by 1 automatically. If need to continue to program No.2 RFID, when the display shows “02”, press “SET” button and
then put another RFID card to sweep the middle of right side of the screen. The speaker will sound “successfully registration”
to confirm registered successfully. After program, press “BACK” button to previous menu or press “BACK” button twice to exit
to standby.
Note:Support up to 99 RFID Card.
Sensing area
•Delete a RFID card separately
Long press and hold “SET” button 3 seconds to enter main setting menu, then press “UP/DOWN” button to select menu F07
，
short press “SET” button to enter F07 submenu, press “UP/DOWN” button to select one of the number which want to delete,
then press “DEL” button at the right side of the screen. If the number was programmed, the number will flicker; If the number
was not programmed before, the number would not flicker. After delete the number, it would not flicker and sounds “Delete
Successfully”.
To delete all RFID card quickly, please use F08 restore factory default (submenu 1 or 2).
8.F08: Restore Factory Default
Long press and hold “SET” button 3 seconds to enter main setting menu, then press “UP/DOWN” button to select menu F08
，
short press “SET” button to enter F08 submenu, the display shows “0” (Default), then press “UP/DOWN” to choose 0, 1 or 2
and then short press “SET” button to confirm restore factory default.
0: restore factory default but not delete transmitter and RFID Card;
1: restore factory default also delete all transmitters and RFID Card (but does not delete manager remote control);
2: restore factory default also delete all transmitters,RFID Card and manager remote control together.
Name
Quantity
Receiver host
1 pc
Power adaptor
1 pc
User manul
1 pc
Remote controller 1 pc
Data line
Packing list
1 pc
2
