Resvent iHope RS Series, User Manual

Page: 70 / 261

4-10
4.User Interface
events are already stored, the new event overwrites
the earliest one.
4.6 Freeze
The freeze function’s feature is that it can pause the
real-time refreshing of waveforms and spirometry loops
on the screen, so that you can have a close examination
of the patient’s status within this time period. The
reviewed data are waveforms and spirometry loops in
the 60 seconds before entering freeze state.
4.6.1 Enter or Exit Freeze Status
When in non-standby status and non-freeze status,
press the key will display the [
Freezing, press Freeze
key again to unfreeze.
] prompt message on the screen
and the system will enter freeze status. Freeze cursors
will appear on the screen near the waveforms and
loops. All displayed waves and loops are frozen, namely,
they are not refreshed. The data in the parameter area
are refreshed normally.
When in freeze status, press the [
Freeze
] key again to
exit the freeze status.
4.6.2 View Frozen Waveforms or Loop
In freeze status, cursors appear on the waveforms or
loops. You can reposition the cursor by touching the
cursor directly.