MC003 Owners Handbook (Z50093)
Page 5 of 8
massage mode every minute. Press the ON / OFF key again to switch off the
unit.
•
Press the HEAT key to switch the heat function on. The HEAT lamp will be
lit when this function is on. Switch the HEAT key again to switch the heat
function off.
•
To adjust the time which the massage unit will run for (shown by the TIME
display) press the TIMER key. The time will then increase up to a maximum
of 99 minutes, after which pressing the TIMER key will reset the time to 1
minute.
•
Press the AUTO key to switch the automatic mode cycle function off, which
stops the unit from changing massage mode every minute. Press the AUTO
key to switch on the automatic mode cycle function. The AUTO lamp is lit
when the automatic mode cycle function is on.
•
Press one of the MODE keys to move up or move down a massage mode. The
current massage mode is shown by one of the ten FUNCTION lamps being
illuminated.
•
Press the INTENSITY key to increase the intensity of the massage vibrations.
After pressing the key, the new intensity will be shown momentarily by
illuminating a number of the FUNCTION lamps (the number lit depends on
the intensity). Once the intensity is at maximum, pressing the key again will
reset the intensity to it’s lowest level.
•
Press the HOLD key to lock the head massage in it’s current state. Press the
key again to release the lock.
CARE AND MAINTENANCE
•
Storage:
o
Keep the massage chair dry and clean. Use a dustsheet to protect the
massage chair if it will not be used for a long period.
o
Do not expose the chair to strong sunlight or high temperatures, as this
could cause the leather to fade.
o
When not in use, switch the massage unit off and disconnect from the
mains.
o
Do not put any heavy articles on to the armrest or footstool as this could
damage the armchair and/or cause it to become unstable.
