L A G U N A F U L L O V E R F U L L B U N K B E D I N S T R U C T I O N S
11. Set the bed slats (F1, F2) on the upper bunk and lower bunk. Secure each slat by using screws (9) provided. See FIGURE 9.
12. For the purpose assembly, the both of Concealed metal bracket (12) were removed and put on hardware pack. At the headboard and footboard
have the holes pre-drilled, this is location of the ladder that you will install. Please determind the location of the ladder for your desired, then install
the Concealed metal bracket (12) into the holes pre-drilled and secure it by Phillips screws (13) provided. Refer to FIGURE 10.
13
FIGURE 10
Fig.10
Fig.9
9
Fig.9
F1
F2
FIGURE 9
8
Page
