Restoration Hardware Baby&Child Marlowe 5773-A614 Instructions Manual Download Page 5

Page 5 of 11

Infants have died in toddler beds from entrapment and strangulation. 
Failure to follow these warnings and the assembly instructions could 
result in serious injury or death. 
NEVER use bed with children under 15 months. 
NEVER place bed near windows where cords from blinds or drapes 
may strangle a child.

The mattress intended for use on the bed shall be a full−size crib mattress having 

minimum dimensions of 51−5/8 in. (1310 mm) in length, 27−1/4 in. (690 mm) in width 
and 4 in. (100 mm) in thickness, not exceeding 6 in. (152 mm) in thickness.

If guardrails are used as the mattress containment means, guardrail(s) provided 

must be used to avoid the formation of a gap between the mattress and the bed that 
could cause an entrapment.

DO NOT 

place bed near windows where cords from blinds or drapes may strangle a 

child.

DO NOT

place items with a string, cord, or ribbon around a child’s neck, such as 

hood strings or pacifier cords.

DO NOT

suspend strings over a toddler bed for any reason.

A child using the toddler or day bed shall be at least 15 months of age and shall not 

weigh more than 50 lbs. (22.7 kgs.).

IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS

WARNING:

ENTRAPMENT/STRANGULATION

HAZARD

Summary of Contents for Baby&Child Marlowe 5773-A614












Reviews: