Page 7 of 10
STEP 3:
NOTE: If you need to move the unit, do not drag it. 2 or more people are needed to safely move the unit.
Model No: 355 - 13
CALLUM FULL-OVER-FULL BUNK BED
SLAT ROLL ATTACHMENT INSTRUCTIONS
Lay the Stretcher Bars (H) in between the Top Side
Rails (F), then tighten using Long Screws (4) and
Philips head screwdriver .
Lay the Slat Roll (G) in between the Bottom Side
Rails (E) and use Long Screws (4) to fasten four end
slats (two on each end) to side rails with a screwdriver .
