background image

Made in Vietnam

Distributed in the U.S.A by:                                                                                               

Restoration Hardware Baby & Child

11640 Harrel St. Suite B 

Mira Loma, CA 91752 

www.rhbabyandchild.com

Distributed in Canada by:

Restoration Hardware Canada, Inc. 

1500-1055 West Georgia Street 

Vancouver, British Columbia V6E4N7 

        

WARNING:

 Read all 

Instructions before assembling 

this product. 

KEEP INSTRUCTIONS FOR 

FUTURE USE.

Page 1 of 10

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to 

the address above. Include the product model number, color, and a brief description of the part. Call 1-800-762-1751.

CARE AND CLEANING

TOOLS AND INSTALLATION

Tools Necessary: Key Wrench (included).

NOTE : It may be easier to assemble product with two people.

NOTE:  When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is completely assembled, 

return to each bolt and tighten.

DO NOT scratch or chip the finish. DO NOT  use abrasive chemicals for cleaning. If the crib is to be stored, store in a cool 
dry place and carefully package all original hardware to protect from loss. 

Model No: 355 - 13

CALLUM FULL-OVER-FULL BUNK BED

All Restoration Hardware bunk bed are designed to meet the highest safety

standards and comply with all U.S. and Canadian bunk bed and cradles regulations.

Summary of Contents for 355-13











Reviews: