www.restek.com
9
8.0 ProFLOW 6000 menu structure
8.1 Unit power up/power down
Press the
(Power) button:
The LCD screen will display
Followed by
Followed by measured
the device intro screen:
calibrated date:
flow data:
01/10/2012
To power off, press and hold the
(Power) button.
Other messages encountered at power up
If the unit is hooked up to a flow stream with a flow rate less than 0.50 mL/min,
the unit will report an “under range” status for the flow. This message will appear
until the flow rate exceeds 0.50 mL/min.
8.2 USB activation
To enable the USB, press the
(Menu) button.
Use the
(arrow) keys to select the USB menu:
Press the
(menu) button again to enter the value select screen.
Use the
(arrow) keys to toggle between USB “on” and “off.”
To return to the main menu screen, press the
(menu) button.
To exit and return to measuring flow, press the
(menu) button again.
è
See Section 7.0: Data Collection on the PC
