PLT
LINE THROWER
6
HOW TO RELOAD THE LINE
IN TO THE LINEBOX
1
. After using the rope, a few steps will ensure optimal
function for next use-
2
. Rinse the line in fresh water and allow it to dry. A wet or
salty line will increase the weight of the line and decrease
the shooting length.
3
. After drying, arrange the line so it can run freely from the
coil or from a bucket.
4
. Tie the end of the line to the loop inside the Linebox.
5
. Put the line manually and randomly in to the Linebox.
Frequently giving it a push downwards or knocking the
Linebox to the floor so that the line is well packed and that
all the line fit in to the Linebox.
6
. When all the line is loaded, tie on the ball, put the lid on
and it is ready for use.
Keeping the line in a linebox ensures that the line runs out
without knots or entanglement. It is also easy stored.
NEVER FIRE THE PROJECTILE
WITHOUT THE LINE
WHY TRAIN WITH THE PLT
®
?
AS FOR ALL SAFETY WORK, TRAINING CAN MEAN
THE DIFFERENCE BETWEEN FAILURE AND SUCCESS.
Summary of Contents for PLT MOORING 150
Page 5: ...PLT LINE THROWER 5 Fig 1 Fig 2 Fig 3...
Page 10: ...PLT LINE THROWER 10...
