DE2295U
1
MDT
MDT
MDT
MDT----122
122
122
122
Man-Down Transmitter
Response
User’s Guide
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
1. INTRODUCTION
MDT-122 is an automatic personal security transmitter. This
micro-processor controlled transmitter is designed for use by
guards in a prison, by security officers in an organization or
institution, or by employees in a large industrial complex (as an
industrial signaling device for safety). In areas that 1 person is
not allowed to work alone, MDT-122 can be an excellent solution.
The MDT-122 alarm signal can be received by a compatible
receiver, like MCR-308, and can be integrated in any alarm
system.
MDT-122 is attached to the guard’s pouch / holster.
The transmitter is activated in the following events (see fig. 2):
A.
PANIC
When the guard needs help, he presses both buttons
(pressing both buttons is required to prevent an accidental
panic message transmission).
B. MANDOWN
When the guard falls down (automatic transmission when the
unit is tilted down by more than 60
°
).
C. PULL-CORD
The pull-cord is attached strongly by a clip to the guard’s belt
on one side and is plugged into the transmitter by an easily
detachable plastic pin on the other side. Pulling the cord or
the unit away causes the plastic pin to be detached and to
release an internal switch that activates an alarm
transmission. This may happen when an attacker tries to
draw the unit away from the guard or by the holder, in case of
emergency and difficulty to press the twin buttons for alarm.
Figure 2 - External View
Figure 3 - Activating the
Internal Tilt Switch
MDT-122
2
MCR-308
wireless
receiver
1
Public
telephone
exchange
OUT
L. BAT
JAMM
READY
BYPASS
POWER
ARM
HOME
AWAY
ND
1
4
7
CLR
2
5
8
0
3
6
9
ENT
A
B
C
D
2
Optional
alarm
system
Optional
automatic
dialer
AUTOMATIC
2 - CHANNEL
SPEECH DIALER
DIAL
Model: DL-
B
C
D
E
F
A-F
A
PROG
STOP
AL-1
AL-2
PROGRAM
ALARM-1
ALARM-2
STOP
3
4
5
6
7
8
9
*
0
#
1
2
3
Siren
Figure 1 - Integration of MDT-122 in an Alarm System
Vertical (normal)
Position
Left
pushbutton
Tilt ON/OFF
slide switch
Pull
cord
Cover
screw
Right
push
button
LED
Temporary
TILT OFF
push-button