D-2457-RLES
1
MCT-212 RL
English
Waterproof
PowerCode Wrist
Transmitter –
User Guide
Español
Transmisor
Impermeable de
Pulsera
PowerCode -
Guía de Usuario
GB/US: LED indicator
SP:
Indicador LED
GB/US: Fastener
SP:
Seguro
GB/US: Transmit
Button
SP: Botón de
transmission
GB/US: Loop
SP:
Hebilla
MCT-212 RL with Wrist Band / RL
con Pulsera para Muñeca
GB/US: Safety release mechanism
SP: Mecanismo de liberación de seguridad
GB/US: Neck cord
SP: Colgante para el cuello
GB/US: Fastener
SP: Seguro
MCT-212 RL with Neck Strap /RL con correa para el cuello
ENGLISH (GB/US)
1. INTRODUCTION
The MCT-212 RL is a miniature waterproof transmitter,
designed for home health care signaling. In the event of an
emergency, help can be summoned at the press of the
transmitter button.
All MCT-212 RL units are supplied with a wrist band and neck
strap. They can be worn on the wrist or around the neck.
The LED lights during a transmission to indicate a good battery.
If the LED flashes during a transmission, this means that the
battery is low and must be replaced immediately. Anytime the
MCT-212 RL is pressed when the battery is low, a trouble signal
will automatically be sent to the Base Unit.
To alert you of the trouble, a red LED will flash and a trouble
message will appear on the display of the Base Unit. All troubles
are reported to the Monitoring Center.
The transmitter case is hermetically sealed (no screws) to
ensure complete waterproofing of the case. Therefore battery
replacement must be performed by the factory only.
2.
TEST, MAINTENANCE & ENROLLMENT
2.1 Enrolling Transmitters
In order for a transmitter to function, its ID must be
enrolled into the Base Unit. The Transmitter ID is a 6
character code (ex: EB1772) that can be found both on
the unit’s package and on the reverse side of the unit. To
enroll a transmitter, provide ResponseLINK (either by
telephone or by fax) of the Transmitter ID.
2.2 Initial Test
Upon pressing the transmit button, the Base Unit will
sound and display simultaneously CALLING FOR HELP.
This indicates that the transmitter is working properly.
Note:
If for any reason the MCT-212 RL does not result in the
above response from the Base Unit, please contact the
central station at 1-800-894-1428 and verify the Transmitter
ID located both on the unit's package and on the reverse side
of the transmitter beneath the wrist band
.
3. GENERAL COMMENTS
Product Limitations
Our wireless systems are very reliable and are tested to high
standards. However, due to their low transmitting power
(required by FCC, DTI and other regulatory authorities) there
are some limitations to be considered:
A.
Receivers may be blocked by radio signals occurring on or
near their operating frequencies, regardless of the code
selected.
B.
A receiver can only respond to one transmitted signal at a
time.
C.
Wireless equipment should be tested regularly (at least
once a week) to determine if there are sources of
interference and to protect against faults.
4. SPECIFICATIONS
Frequency (MHz):
315
Transmitter ID:
Over 16 million possible code combinations.
Minimum Transmit Duration:
2 sec
Power Supply:
3-volt Lithium cell type CR-2032
Battery Life Expectancy:
3 years (for typical use)
Battery Supervision:
Good battery - LED lights steadily upon activation.
Low battery - LED flashes upon activation.
Note:
If transmission is still possible despite the battery
condition, the MCT-212 RL will send a low battery report to the
receiver.
Operating Temperature:
0° to 50°C (32° to 122°F).
Dimensions:
39 x 37 x 13 mm (1-9/16 x 1-7/16 x 5/8 in.).
Weight:
25 g (0.9 oz).
Color:
Gray
This device complies with Part 15 of the FCC Rules and RSS-
210 of Industry and Science Canada. Operation is subject to
the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
WARNING:
Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
IF YOU HAVE ANY QUESTIONS PLEASE CALL (800) 894-1428.
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are discarding this product and not
returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste.
Directive 2002/96/EC Waste Electrical and Electronic Equipment.
