2-2
rEm
star
a
uto
m s
ErIEs
u
sEr
m
anual
The device’s display screen shows the set pressure, patient data, instructions, and error messages.
See Chapter 4 for instructions on navigating the display screens.
Figure 2–3 provides a view of the entire device control panel, with the cover door open.
Cover Door
Previous
Screen
Button
Next
Screen
Button
Decrease
Button
Increase
Button
Ramp
Button
Start/Stop
Button
Flex
Button
Flex
Placement Area
for Optional Quick
Reference Label
f
IgurE
2–3 d
EvICE
C
ontrol
p
anEl
2.1.1 C
ontrol
p
anEl
I
naCtIvIty
Some screens have time-out periods. The screen’s timer starts when the screen is initially displayed
and is restarted whenever a button is pressed. The screen times out after one minute if there is no
activity and returns to the Standby screen.
2.2 r
Ear
p
anEl
Figure 2–4 shows the REMstar Auto M Series device’s rear panel (without a humidifier).
Air Outlet Port
Accessory Slot
Filter Area
DC Power Inlet
f
IgurE
2–4 rEm
star
a
uto
m s
ErIEs
r
Ear
p
anEl
The rear panel contains the following:
• An accessory slot for optional accessories such as the SmartCard or modem (see Chapter 6,
Accessories
, for more information).
• A filter area where the filter(s) supplied with your device should be inserted.
• A DC power inlet where the power cord is connected (see Chapter 3,
Setup
, for complete
information on supplying power to the device).
• The air outlet port where the breathing circuit’s flexible tubing is attached.
