Respirex SIMH024 Instruction Manual Download Page 5

Page: 5 / 26

General Information

Respirex Supplied-Air Respirators, when properly used, provide a continuous fl ow of air from a remote air

source, to the wearer. Respirex Supplied-Air Respirators off er protection from airborne contaminants that

are not immediately dangerous to life or health (IDLH). Consult OSHA, EPA, NIOSH or ACGIH regulations

and recommendations before use.
Respirex Supplied-Air Respirators are approved by NIOSH (advise) Type C to provide respirator protection

in general purpose applications including pharmaceutical manufacturing, chemical and pesticide

handling, tank cleaning, spray painting and other industrial or agricultural applications in which hazardous

compounds are present.
Respirex Supplied-Air Respirators are compatible with breathing air compressors.
Respirex also supply airline hose and fi ttings to connect the respirator to the breathing air source.

Summary of Contents for SIMH024



























Search results

Summary of Contents for SIMH024

Reviews:

Related manuals for SIMH024

Brands by name

Popular brands

Respirex SIMH024, Instruction Manual

Search results

Summary of Contents for SIMH024

Reviews:

Related manuals for SIMH024

Brands by name

Popular brands