Storage
To prevent damage occurring during storage the system is supplied in a plastic
container. Suits should always be stored in a clean and dry condition at ambient
temperature. If being stored for long periods of time the suits should be kept out of
direct sunlight.
Spares
and
Accessories
Cotton gloves
Sea boot socks
Peakless safety helmet
Re-hydration pack
Replacement neck seal
Hazbag with tie and tag
453-09-25 (A2B1E1K1P R)
filters (6 pairs)
Re-chargeable NiMH battery pack
Battery charger
‘Fog-Off’ anti-misting agent (100 ml)
‘Synodor’ anti-bacterial cleaner (5 l)
‘Citrikleen’ cleaning agent (5 l)
H01021
H00075
G01001
G01002
G01011
G01652
F00959
F00957
F00958
F00934
F00937
F00938
Cleaning
Respirex do not recommend laundering the PRPS(T). When the suit becomes dirty it
should be wiped with a sponge using warm water and Citikleen*, rinsed and allowed
to dry naturally. The inner surfaces of the suit should be sanitized using Synodor*.
Do not use solvents or strong cleaning and disinfecting agents, these may degrade the
materials from which the suit is constucted.
Do not allow water to enter the breathing tube, any part of the AFU assembly or
filters.
* see Spares and Accesories
4
Based upon real time use, the PRPS(T) suit system has a minimum shelf life of five
years.
In order to maintain the level of protection offered, care should be taken to
minimize the risk of damage occurring to the PRPS(T) suits during transportation
between work areas. It is recommended that all PRPS(T) suits are transported in a
suitably sized rigid container resistant to penetration by sharp objects, abrasive
surfaces, chemicals, oils, solvents etc.
For the purposes of disposal a sealable hazbag is included with the system. For further
information on disposal refer to page 19.
