EN - 25 -
Tips for saving energy
1–
Install the appliance in a cool, well ventilated room , but not in direct sunlight and
not near heat source (radiator, cooker.. etc. ). Otherwise use an insulating plate.
2–
Allow warm food and drinks to cool down outside the appliance.
3–
W hen placing, drinks and liquids they must be covered. Otherwise humidity
increases at the appliance. Therefore the working time gets longer. Also covering
drinks and liquids helps preserve the smell and taste.
4–
W hen placing food and drinks, open the appliance door as briefly as possible.
5–
Keep the covers closed of any different temperature compartment in the appliance
(crisper, chiller ...etc. ).
6–
Door gasket must be clean and pliable. Replace gaskets if worn.
Recommendations
• In order to increase space and improve the appearance, the « cooling section » of
refrigerators is positioned inside the back wall of the refrigerator compartment.
When the appliance is running, this wall is covered with frost or water drops, when
the compressor is running. Do not worry. This is quite normal. The appliance should
be defrosted only if an excessively thick ice layer forms on the back wall.
• If the appliance is not used for a long time (for example during the summer holidays).
Set the thermostat knob to « • » position. Defrost and clean the refrigerator leaving
the door open to prevent the formation of mildew and smell.
Summary of Contents for KS122.0A++
Page 1: ...KS122 0A EINBAUGERÄTE KÜHLEN Bedienungsanleitung BUILT IB REFRIGERATOR User manual 52181780 ...
Page 15: ...DE 14 5 5 5 3 4 6 Abb F Abb G Abb H ...
Page 30: ...EN 29 1 2 4 3 5 6 6 1 2 2 A B 1225 1225 1245 Figure A Figure B Figure C Figure D Figure E ...
Page 31: ...EN 30 5 5 5 3 4 6 Figure F Figure G Figure H ...
