components of your appliance can be seriously damaged by water over-
boiling or spilled water.
Refrigerant circuit
1. Do not damage the refrigerant circuit. The appliance uses the
environmental-friendly refrigerant R600a. The refrigerant R600a is
flammable !!! Therefore
the cooling circuit must not be damaged in any
way
neither by transport nor use.
2. If any part of the cooling circuit is damaged, the appliance must not stand
near a fire, naked light or spark-generating devices. Contact your after sales
service immediately .
3. If gas is set free in your home:
•
Open all windows.
•
Do not
unplug the appliance and
do not
use the control panel or
thermostat.
•
Do not
touch the appliance until all the gas has gone.
•
Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other sources of
ignition when you dispose of or decommission the appliance.
Ventilation
1. The air vents of the appliance or its built-in structure ( if the appliance is
suitable for being built-in) must be completely open, unblocked and free of
any kind of dirt.
2. The condenser and the compressor, located at the rear of the appliance, can
reach high temperatures during ordinary operation. Carry out the installation
according to this manual. An insufficient ventilation of the appliance will
impair its operation and will cause damage to the appliance. Do not cover or
block the ventilation slats at any time.
Inside the appliance
1.
EXPLOSION HAZARD!
Do not store any explosive materials or sprays,
which contain flammable propellants, in your appliance. Explosive mixtures
can explode there.
2.
Do not put any gassy beverages
into the freezing-compartment of your
appliance, because their containers could explode.
3. All refrigerators and freezers have surfaces which are subject to formation
38
