Resource Ulisse Dining Assembly Instructions Manual Download Page 18

Ulisse Sofa: Remove back cushions

 from sofa 

and store.

Ulisse Dining: Remove articles from table  
surface 

that are more than 1” high

1

SAFELY OPERATING YOUR 

ULISSE/ULISSE SOFA/ULISSE DINING

To Open Your Bed:

Release

 the two mattress 

straps

 by squeezing 

the center of the clasp.

Tuck

 the 

straps

 under the mattress

4

Congratulations on your Ulisse Wall Bed! 

We’ll bet you didn’t even know how smart you were. Of course, you are now the envy of all of 
your friends and neighbors, so get used to being admired.
Your Ulisse Wall Bed system is designed to provide a lifetime of comfort and function, so follow 
these instructions and you’ll get along famously.

2

Release Latches 

are located on both sides in  

the space between the outer structure and the 
front panel. 
Reach in with your index finger and 

release either 

one of the latches

, pulling forward slightly on the 

release latch.

For your safety, the bed frame will automatically 
stop after opening a few inches.

Grasp one of the legs or the edge of the steel 
frame of the bed to pull down.

Make sure to support the bed frame for  
the entire descent until both bed legs are 
firmly resting on the floor.

3

  Just one more thing – you can stand on principle, but never stand on the sofa or the table!

SEE YOU IN THE MORNING!

5

Latch

Summary of Contents for Ulisse Dining




















Reviews: