ENGLISH
3. Setting the transmitter
3.1 Programming
Set the locking button (11) to Off. Press the Set button (5) to access the programming
menu.
Programming buttons
Set
.
• Takes you to the next level.
• Saves your settings.
.
Back
.
• Takes you back a level.
• Quits programming mode.
Up�Down
.
• Increases/reduces a value.
3.2 Programming modes
There are five different programming modes: Channel, Deviation, Line Level, On/Off
key and Power.
Channel
Select channel:
There are 106 pre-programmed channels to choose from. These are
channels 20-99 which correspond to other channels in the modeX system. In addition,
there are 19 H, J and N channels specifically for Phonak frequencies and 7 S channels
specifically for Solaris frequencies. All channels can be received by modeX Receiver even
if the frequency does not match precisely. Channels 00-19 do not have a pre-programmed
frequency and can be adjusted as required, see below.
Change frequency:
You can change channels 00-19 to any frequency. These channels
do not work if no frequency value is selected. Hold in the button to step through more
rapidly. The frequency steps through 25 kHz for each rapid press of the Up or Down
button.
IMPORTANT.
When.you.have.selected.a.setting,.you.must.press.Set.to.save.it.
