1
2
30
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.
ReSound standard domes
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure
this:
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest “petal” back,
and it will be placed on top of the
smaller petal.
400344011-US-15.04-Rev.B.indd 30
20-05-2015 11:48:59
As needed:
Change dome (H)
(if applicable)
ReSound standard domes
1. Push the new dome on to the thin
tube.
2. Make sure that the new dome is
properly and securely maintained.
ReSound tulip domes
Tulip domes consist of two “petals”.
It is important that the largest petal is
the outermost petal. To ensure this:
1. Push the largest petal away from
the thin tube using a finger.
This bends the petal forward.
2. Then push the largest “petal”
back, and it will be placed on top
of the smaller petal.
1
2
30
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.
ReSound standard domes
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure
this:
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest “petal” back,
and it will be placed on top of the
smaller petal.
400344011-US-15.04-Rev.B.indd 30
20-05-2015 11:48:59
Connecting audio boot and
integrated FM
1. Align the tip of the audio boot
or integrated FM boot with
designated groove (F).
2. Once in place, move the boot
in the direction of the battery
compartment.
3. Gently click the boot onto the
hearing instrument.
Disconnecting audio boot and
integrated FM
1. Press and hold the button on the
front side of the audio boot. For an
FM boot, slide the latch downward
with your finger nail.
2. Gently remove the boot from the
hearing instrument.
Connecting/disconnecting
direct audio boot or Integrated FM
Direct Audio
Integrated FM
1.
2.
1.
2.
3.
