WARRANTY INFORMATION
SeaBat 7125 ROV Operator‟s Manual
Page 180
May 30, 2011
Version 3
F.4 Servicing During Warranty Period
If your system should fail during the warranty period, please contact your nearest
RESON representative immediately (see
section F.6 below
) to protect your warranty
rights.
F.5 Equipment Return Procedure
Before returning any equipment for service, you must follow the RESON equipment
return procedure stated below:
1. Contact a RESON office to obtain an approved Return Material Authorization
(RMA) number.
2. Follow the instructions in the supplied document and pack the equipment in
the original shipping containers.
3. Ship the equipment to your RESON representative to the applicable address.
4. Ensure that the RMA number is included on all shipping documents and,
most important
ly, marked on the shipping container‟s address label.
5. Include a note with a brief, but thorough, description of the problem.
F.6 Service
If you are experiencing difficulty with your RESON system, please contact RESON
Service Department at one of the following addresses for further instructions:
DENMARK
RESON A/S
Fabriksvangen 13
3550 Slangerup
Denmark
Tel: +45 47 38 00 22
e-mail:
UNITED STATES
RESON, Inc.
100 Lopez Road
Goleta, CA 93117
USA
Tel: +1 805 964 6260
e-mail:
Summary of Contents for SeaBat 7125 ROV
Page 2: ...This page intentionally left blank...
Page 14: ......
Page 63: ...SYSTEM CONFIGURATION SeaBat 7125 ROV Operator s Manual Page 47 May 30 2011 Version 3...
Page 199: ......
