Resol PSW Premium Pump, Manual

Page: 15 / 40

en
15
2.5 Application example
X
IP 20
T4A
100 – 240 V~
50 – 60 Hz
Temp. Sensor Pt1000
S1 S2 S3 S4 R1 VBus
1 2 3 4 5 6 7 8 9 10 12 13 14 17 18 19 20
N N L
1 (1) A 100 – 240 V~
3 4 5
10V PWM
6 7 8 9
L N N ROut
1 2
R In
blue brown
brown
yellow/green
blue
Power supply 230 V~ / Mains connection
230 V~ / Mains connection
black (not used)
Signal cable
PWM
Signal input Pump Power supply Pump
Input signal:
230 V control signal from the
controller (On / Off, burst / wave
packet, phase cutting)
Example: connection to a DeltaSol
®
BS controller
2.6 LED flashing codes
Flashing code Description
Green: Output on standby
Green flashing: Output active
3 Tips for fault diagnostics
If the device does not work perfectly, please check the following items:
If the device does not switch on when the power supply is connected, please check the
fuse. The device is protected by a T1A fuse, which can be replaced after having removed
the housing and the cover. A spare fuse is enclosed on the backside of the cover.
4 Accessories
HE-Check – Testing device for PWM- and 0-10 V signals
With the HE-Check, the function of the pump and the sig-
nals of the controller can be checked quickly and easily.